9/125 Single Mode Fiber Patch Cables LC/UPC-FC/UPC Simplex 2.0mm
1. Using high precision ceramic insert with small concentricity error and inner hole diameter to provide better insertion loss and return loss to avoid degradation of transmission performance and damage to optical transceiver devices.
2. Introduction of foreign advanced grinding technology and grinding equipment to ensure that the optical fiber's circular grinding offset, the fiber's depression, the fiber's surface without scratches and defects, the size of the radius of curvature of the ceramic capital end face and other grade parameters comply with the standard.
3. Insertion loss is small, return loss is large, interchangeability is good, repeated plugging performance is excellent, easy to use.
4. Can provide a full set of customized services according to customer requirements. 5.
5. All components are optically tested and tested in accordance with ROHS standards.
6. Compliance with ANSI / TIA / EIA and ISO / IEC requirements for durability, moisture resistance, coupling stress, fiber optic tensile force and adaptability to harsh environments such as humidity, temperature extremes, plugging and unplugging forces and cable tensile stress, impact and vibration.
7. Operating temperature (-40℃~+75℃), storage temperature (-40℃~+85℃)
| Item | SM | MM |
| Polishing Type | PC | UPC | APC | PC |
| Insertion Loss | ≤0.2dB (Typical ≤0.1dB | ≤0.3dB/0.5dB(MTRJ) |
| Custom | | | | |
| Return Loss | ≤-45dB | ≤-55dB | ≤-65dB | / |
| Custom | | | | |
| Durability(500 Mating) | 0.2 dB Max. Increase |
| Operating Temperature | -20°C~+75°C |
| Storage Temperature | -40°C~+75°C |
| Remark: | Ferrule Concentricity<1μm |
| | Ferrule inner diameter tolerance+1/ 0μm |
| | Ferrule outer diameter tolerance±0.5μm |
| | Insertion loss<0.1dB random mating |
Fiber optic patch cord is a fiber optic cable capped at both ends with connectors that allow it to be rapidly and conveniently connected to CATV, optical switch, or other telecommunication equipment. With a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box, which is known as "interconnect-style cabling".
Features:
Low insertion loss
High return loss
Good repeatability
Good interchange
Excellent environmental adaptability
Applications:
Communication rooms
FTTH (Fiber to The Home)
LAN (Local Area Network)
FOS (fiber optic sensor)
Fiber Optic Communication System
Optical fiber connected and transmitting equipment
Defense combat readiness
It is a device used to make removable (movable) connections between optical fibers. It is a precision buttressing of the two ends of an optical fiber so that the light energy output from the transmitting fiber can be coupled to the receiving fiber to the maximum extent possible and the impact on the system due to its intervention in the optical link can be minimized. Fiber optic patch cord is a passive optical device to realize the active connection between optical fibers, it also has the function of connecting optical fibers to active devices, optical fibers to other passive devices, optical fibers to systems and instruments.
Type
Performance | Singlemode | Multimode |
| Standard Loss | Low Loss | Standard Loss | Low Loss |
| Insertion loss | Maximum Value | ≤0.7dB | ≤0.35dB | ≤0.5dB | ≤0.35dB |
| Typical Value | 0.4dB | 0.2dB | 0.35dB | 0.2dB |
| Return Loss | ≥60 dB | ≥20dB |
| Test Wavelength | 1310nm / 1550nm | 850nm / 1300nm |
ABOUT US
ADTEK
Shenzhen ADTEK Technology Co., Ltd. was established in 2007,is a leading professional manufacturer and exporter from China,With over 12 years' experience in the export market. ADTEK has been continually growing and expanding the product lines to keep up the pace of industry trends. leading network connection products and solutions
Ultra-large bandwidth, ultra-low loss, ultra-high speed, 400G network connection for the next generation.
Product Tags:
|
|
9/125 Single Mode Fiber Patch Cables LC/UPC-FC/UPC Simplex 2.0mm Images
|
